lab

Studio Disk

lab · hardware · Commodore 64 · IEC · ESP32

The Commodore 64 on the electronics bench now loads a small BASIC program from an ESP32 sitting on a breadboard. The directory calls itself STUDIO DISK. Getting there took a six pin DIN plug, two BC547 transistors, a handful of resistors, a bad USB cable and a shorted breadboard rail.

I started from drawing in Koala Painter. I wanted a way to save drawings and move them between the C64 and the rest of the studio. Once a wireless microcontroller sits on the serial bus, other ideas become tempting: a news reader, a strange little text browser, or a terminal for David. Talking to him through the C64 would be hilarious.

This first version serves a directory and one program stored in the firmware. The ESP answers as IEC device 9. On the C64 I load the directory, list STUDIO DISK and HELLO, then load the program and run it. The screen prints HELLO FROM THE STUDIO.

Saving drawings, removable storage and network talk are still ahead. The useful milestone is that the physical interface and a basic file transfer work together on the real computer. The firmware builds on David Hansel’s IECDevice library.

Notes and schematic

Studio Disk notes and schematic (zip) · writeup of the bench build plus the BC547 IEC interface diagram.